Fast moving automatic plastering machine for inner wall and outside wall

Product name: TUPO-9 Series Automatic Plasteirng Machine- the newest model in 2019

Plastering machine technical parameter:

Application:

1. Automatic wall rendering machine is the ideal equipment for residential buildings, office buildings,school building,etc.

2. It can plaster on cement wall, brick and concrete wall, hollow wall , light body brick, baking free brick wall etc.

3. The rendering material could be lime, cement mortar , foam mortar, gypsum etc.

4. It could be adjust different thickness to suit each operation.

Company Information

Our Service
Pre-Sales Service
* Inquiry and consulting support.
* View our Factory.

After-Sales Service
*One year Quality Warranty.
* Training how to instal the machine, training how to use the machine.
*Normally the service life of our machines can be 3-5 years
* Engineers available to service machinery overseas.

Our Services

I. We offer 2 year Quality Warranty for our machines.

II. We are 24 hours engineering online.

III. We offer full set of easy-spoiled spare parts and tools for back up.

IV. We can send our engineer abroad to training customers to operate the machine.

Packaging & Shipping

Problems Meet And Solutions:

I. press start button, there is no respond from machine

1. check if the two livers have been pulled up.

2.check if the stop switch on the left side of machine works by pressing the switch

3.check the power supply

II.press start button ,machine goes up but the conveyer is not rolling.

1. switch on the conveyer switch.

2. check the chain on right side of machine , if the chain is rolling, that

mean the conveyer is loose. In this case, we have to tight the conveyer by

adjusting the screws on both side of machine closer to the plastering trowel.

III. Machine reach to ceiling but no stop automatically

Cut off power supply by turning off main switch, next turn on main switch to connect power supply, and then machine comes down automatically.

IV. Machine comes down but stops in the middle. (machine will be automatically stopped when meet difficult )

1. check if the directional pipes are clean .

2.shake the directional pipes to make machine comes down.

3.release the hydraulic a little to enable machine come a bit down, and secure hydraulic & pump.

V. Machine goes up and stops in the middle

1. Cut off power supply by turning off main switch, next turn on main switch to connect power supply, and then machine comes down automatically.

2.check if anything in the plastering trowel prevents machine going up

3.check if anything on the wall prevents machine going up

I. Normally the service life of our machines can be 3-5 years.

II. We offer 1 year Quality Warranty for our machines.

III. We offer full set of easy-spoiled spare parts and tools for back up.

IV. We can send our engineer abroad to training customers to operate the machine.

V. We resolve any problem together with our customers.

After sales photos